Commercial Agricultural Air Industrial Dehumidifier
basement Parameters
| Article No. | NSD232 |
| Article Name | Commercial Stainless Steel Dehumidifier |
| Dehumidify Capacity | 90L/DAY |
| Applying Area(with three meters height) | 90-110 |
| Voltage | 220V/50HZ |
| Power | 1050W |
| Air Circulation | 550M³/H |
| Refrigerant | R22 |
| N.W.(KG) | 45KGS |
| G.W.(KG) | 50KGS |
n the process of transportation and placement of industrial
dehumidifier, there will inevitably be vibration, roll and other
actions, resulting in the displacement of refrigerant in the
compressor.If the machine is turned on at this time, the compressor
will not work normally, the noise will be large, and the
dehumidification efficiency will be relatively low.Therefore, it is
necessary to stand the dehumidifier for a period of time, so that
the refrigerant in the compressor can be reflux in place before it
is used.
After opening the dehumidifier, it should be kept in standby state
as far as possible, and do not open and close frequently, so as to
greatly reduce the damage to the machine performance and not waste
a lot of electricity.After power failure, it is necessary to turn
off the power immediately to prevent the sudden power call and the
sudden impact of large current on the dehumidifier and damage the
dehumidifier.
In terms of placement, it is recommended to place the dehumidifier
in a place with air circulation and flat ground, and put it next to
the wall.In this way, the moist air is pumped into the dehumidifier
as soon as possible, and the dry air can be quickly circulated to
all corners of the workshop to achieve better dehumidification
effect.
