Industrial Heating Machine Dehumidifier
| Model | CGF3.0/SN |
| Voltage | 220~240V,50Hz |
| Rate power | 3000W |
| Air circulation | 1000m3/h |
| Weight | 55KG |
| humidity control range | 10-98%RH |
Feature
1.Computer intelligent control, equipped with temperature-resistant
super 7-inch touch color screen, easy to operate, easy to
understand, running state and parameters can be followed
2.Frame design, easy to disassemble and maintain, beautiful
appearance
3.Strong temperature ability, high temperature dryer can work
normally in 55℃/60 h or 60/50 h high temperature environment, high
temperature dryer can work at 65℃/60 or70℃/50 h Normal operation at
high temperature
4.Special stage control function, can set up up to 5 stages of
operation temperature, humidity and time, when indoor temperature,
humidity and time to meet the switching conditions, the equipment
automatically step Automatic shutdown until the end of the
phaseAutomatic shutdown until the end of the phase Automatic
shutdown.
5.The special control function of the exhaust fan, according to the
setting of the exhaust air temperature, can control the start and
stop of the exhaust air fan in the baking room, cooling and
dehumidifying the baking room, so that the temperature and humidity
in the baking room can be controlled
6.High-precision temperature and humidity sensor, accurate
temperature and humidity control, long service life;
Detail
1.Set range ∶10 h~98 h, temperature range 20℃h~70, continuously
adjustable
2.Time clock function, can display year, month, day, time, week,
with power-down memory function, memory parameters set value
3.Can turn on / off function regularly, can set Monday to Sunday
every day intelligent switch machine
4.Setting temperature and humidity, with timing switch function,
can realize unattended, intelligent control
5. the temperature and humidity numerical curve display function,
the visual view 24 hours temperature and humidity value continuous
change situation
6.Stage control can save up to 5 formula parameter values,
convenient for users according to the actual situation, call to the
actual situation. Unique fault alarm and fault handling
instructions display function to remind staff to deal with the
difference in time and effectively
dehumidification efficiency will be relatively low.Therefore, it is
necessary to stand the dehumidifier for a period of time, so that
the refrigerant in the compressor can be reflux in place before it
is used.
After opening the dehumidifier, it should be kept in standby state
as far as possible, and do not open and close frequently, so as to
greatly reduce the damage to the machine performance and not waste
a lot of electricity.After power failure, it is necessary to turn
off the power immediately to prevent the sudden power call and the
sudden impact of large current on the dehumidifier and damage the
dehumidifier.
In terms of placement, it is recommended to place the dehumidifier
in a place with air circulation and flat ground, and put it next to
the wall.In this way, the moist air is pumped into the dehumidifier
as soon as possible, and the dry air can be quickly circulated to
all corners of the workshop to achieve better dehumidification
effect.
