Cooling Dehumidifier Thermostat Dehumidifier Decrease Temperature
Dehumidifier
| Voltage | 380V/50Hz |
| dehumidification capacity | 38KG/H |
| Max rate power | 10700W |
| Indoor unit Air circulation | 3500m³ |
| Outdoor unit Air circulation | 5000 m³ |
| Gross weight | 188KG |
| Place of use | factory |
Feature
1. Novel design, beautiful appearance, the use of high-strength
cold-rolled steel plate;
2. Use internationally renowned compressor, equipped with two
intra-Amusing devices, more excellent dehumidification effect;Use
famous brand globe valve, durable and no air leakage;
3. Intelligent control system, which can quickly judge the cause of
failure;
4. Simple and convenient operation, temperature and humidity
display;
5. High efficiency centrifugal fan or external rotor, small volume,
large air volume, low noise, long life.
6. Use beautiful and durable plastic outlet, easy to lock water
pipe, no leakage;
7. The temperature difference between the air outlet temperature
and the air inlet temperature is small (about 3~5 lower., greatly
improve the effect of dehumidification, and at the same time to
ensure the temperature, reduce the machine surface condensation of
water generation.
Detail
1. The humidity setting is continuously adjustable from 10~98RH%,
and the dehumidification operation is mandatory when the humidity
is set at 10RH%;
2. With temperature control function, the setting range is
10~35.When the temperature drops to the set value, the machine will
stop automatically.
3. High efficient and automatic defrosting function suitable for
low temperature;
4. With fault alarm output interface, linkage control with other
devices can be realized (optional);
5. The system has the function of high voltage and low voltage
protection to ensure the safe and reliable operation of the
machine;
6 with RS485 interface (Modbus communication protocol), it can
realize remote switch control of dehumidifier, humidity setting and
actual operation status monitoring (optional);
7. Support dual operation panel to realize simultaneous local and
remote control (optional);
When the machine is working, the window is not closed, and the
moisture outside the window will continue to enter the room, which
is the same reason as the cooling of air conditioning.
Before using the dehumidifier, the door and window of the room are
closed to form a closed space to better play the effect of
dehumidification.
Industrial dehumidifier should be placed in a place with air
circulation and flat ground, so that the wet air can be quickly
pumped into the dehumidifier, and the dry air can be quickly
circulated to all corners of the factory, so as to achieve better
dehumidification effect.
On the other hand, the machine does not need to be close to the
wall, because after a long period of operation, the machine
temperature will continue to rise;The air inlet of the machine
should be kept away from the goods. Goods are forbidden to be
placed on the top of the machine to avoid blocking and affecting
the circulation effect.
