Wall Mounted Dehumidifier For Garage 1150W 4kg/H
Parameters
| Article No. | CFB4.0D |
| Article Name | Industrial Dehumidifier |
| Dehumidification capacity | 4Kg/h |
| Applying Area(with three meters height) | 100~120M² |
| Voltage | 220V~50Hz |
| Rated Power | 1150W |
| Air Circulation | 1000M³/H |
| Refrigerant | R22 |
| N.W.(KG) | 55KGS |
Product Description
Industrial dehumidifier should be placed in a place with air
circulation and flat ground, so that the wet air can be quickly
pumped into the dehumidifier, and the dry air can be quickly
circulated to all corners of the factory, so as to achieve better
dehumidification effect.
On the other hand, the machine does not need to be close to the
wall, because after a long period of operation, the machine
temperature will continue to rise;The air inlet of the machine
should be kept away from the goods. Goods are forbidden to be
placed on the top of the machine to avoid blocking and affecting
the circulation effect.
Functions
1) Microcomputer Automatic Humidity Control Function
2) LCD Display of Current Environmental Temperature and Humidity
3) Efficient automatic frost system, low temperature application
4) Special humidity 1% RH adjustable function
5) 1-24 hours timed shutdown function
6) Open-window hydrophilic aluminum foil fins, greatly improving
heat transfer efficiency
7) Intelligent control system can quickly judge the cause of
failure
8) Centrifugal fan, strong wind, uniform air flow, low noise
9) International brand compressor, stable performance, durable and
strong dehumidification effect
After opening the dehumidifier, it should be kept in standby state
as far as possible, and do not open and close frequently, so as to
greatly
reduce the damage to the machine performance and not waste a lot of
electricity.After power failure, it is necessary to turn off the
power
immediately to prevent the sudden power call and the sudden impact
of large current on the dehumidifier and damage the dehumidifier.
In terms of placement, it is recommended to place the dehumidifier
in a place with air circulation and flat ground, and put it next to
the
wall.In this way, the moist air is pumped into the dehumidifier as
soon as possible, and the dry air can be quickly circulated to all
corners of
the workshop to achieve better dehumidification effect.
Dehumidification machine for air duct (inlet and outlet) on a
regular basis or filter to clean up, factories and warehouses of
dust is more, for
a long time use dehumidifier the wind can't get into dehumidifier,
will directly affect the dehumidifying effect, so need to regular
cleaning of
the dehumidifier air duct filter, frequency can be decided
according to the condition of site conditions and mesh.
